Dasso Decking

Manufactured from fine-engineered bamboo through thermal treatment and phenolic bonding, DASSO achieves exceptional hardness and dimensional stability across diverse climates. The material’s superior slip resistance and termite resilience make it ideal for both undercover and exposed deck areas.

Combining the warm, natural beauty of authentic bamboo with remarkable structural strength, DASSO is built to endure. Designed for the demands of outdoor living, it offers a beautifully low-maintenance finish that stands the test of time. A streamlined installation process makes it as practical on-site as it is visually appealing, all while holding strong environmental and sustainability credentials.

How much surface do you need to cover?

Product colour:Congac

Congac

Espresso

Product type: Strandwoven engineered bamboo decking with clip/tongue and groove system
Series: DASSO Decking & Lumber
Profile: Click Unilin angle to angle, with micro-bevelled edges
Finish options: Pre-finished in multiple stains (Cognac, Espresso, Dasso)
Dimensions: 1850 mm (L) x 137 mm (W) x 20 mm (T)
Density: 1200 kg/m³
Durability: Class 1
BAL Rating: Up to BAL 29
Fire rating: Group 3, Bfl-s1
Slip rating: Class B (DIN 51097:1992)

Boards arrive pre-finished and ready for installation via the click Unilin profile system.
Lay boards with the groove side facing downward to allow moisture drainage beneath the deck.
Leave appropriate expansion gaps (typically 5–10 mm) around perimeter and fixed objects.
Install on properly prepared joists, battens, or subfloors using the click system for seamless alignment.
Staggered board layout is recommended for visual appeal and structural integrity.
Ensure substrate is level and dry before commencing installation.

Store in a cool, dry area; exposure to prolonged moisture before installation may cause surface mould or dimensional movement.
Minimize handling during delivery and storage to prevent edge or surface damage.
Stack boards flat with even support every 30–60 cm.
Do not install directly on soil or in areas subject to standing water.
Product is not suitable for fully submerged or continuously wet environments.
Termite-resistant (tested against Reticulitermes santonensis per DIN EN117:2012) but should be regularly inspected in high-risk regions.

Sweep or vacuum regularly to remove debris and prevent surface scratching.
Clean with a soft-bristle brush and mild, pH-neutral cleaner; avoid abrasive pads or high-pressure washing.
Allow decking to dry thoroughly after cleaning to prevent moisture trapping in joints.
Inspect the click system and joints annually for any separation or movement.
Reapply compatible protective oil or sealer every 12–24 months, depending on exposure to UV and weather.
Address any surface scratches or wear with appropriate touch-up finishes to maintain both appearance and protection.