• Product type: Whole bamboo pole rod screen
• Manufacture: Poles bound centrally with 1–2 mm stainless steel wire
• Series: Natural | Organic
• Dimensions :
• • Natural/Light Carbonised – 1220 × 1830 × 22–26 mm | 1220 × 2440 × 22–26 mm
  • Black – 1200 × 1830 × 22–26 mm | 1200 × 2440 × 22–26 mm
  • Huangku – 1200 × 1800 × 22–26 mm | 1800 × 2400 × 22–26 mm
• Finish options: Natural Raw, Light Carbonised, Black, and Huangku; custom stains available.
• Weight per Screen: 15.5–25.4 kg
• Durability: Class 1 (EN 350 / CEN/TS 15083-2)
• Fire Rating: Class 3 AS/NZS 5637.1–2015
• Moisture Content: 15–19%
• Emission Rating: E1 ( < 0.124 mg/m³) [EN 717-1]
• Nominal Mass per Unit Area/Density 5kg/9.15m2

• Composition: 100% bamboo (Phyllostachys spp., family Poaceae), with stainless steel wire (1–2 mm)
• Safety: Termite resistant, Non-hazardous under GHS and Australian WHS regulations

Certifications: FSC® Certified on request, Global GreenTag Certified – Level A, HealthRate Platinum. Compliant with WELL, Green Star, LEED, and IS Rating Tool standards.

• Resort and hospitality screening.
• Residential garden or patio privacy walls.
• Commercial outdoor dining partitions.
• Meditation and wellness spaces.
• Interior wall, ceiling, or decorative partitions.
• Sustainable architecture pursuing Green Star, LEED, or WELL credits.

• Allow the product to acclimate 48–72 hours before installation.
• Fix using stainless steel fittings suited for bamboo or timber screening systems.
• Screens can be mounted vertically or horizontally on frames, fences, or structures.
• Leave a small expansion joint for moisture movement.
• Avoid direct ground contact; elevate from soil or standing water.
• Ensure sound support using framing or cabling systems for larger spans.

• Periodically clean with a soft brush or damp cloth; avoid harsh solvents or steel wool.
• For exterior use, apply natural bamboo sealant or oil every 12–18 months depending on exposure.
• Regularly inspect wire tension to maintain screen integrity.
• Re-seal cut edges and ends after trimming.
• Internal installations require only gentle dusting or light polish.

• Store flat in a cool, dry, shaded location prior to installation.
• Avoid moisture contact before use to prevent mould or discolouration.
• Do not install in constant wet or poorly ventilated areas.
• Not suitable for below-ground or submerged applications.
• Variations in grain, tone, and diameter are inherent to the natural material and not defects.